A Comparative CFD Study on Simulating Flameless Oxy-Fuel Combustion in a Pilot-Scale Furnace

The current study presents a method to model the flameless oxy-fuel system, with a comparative approach, as well as validation of the predictions. The validation has been done by comparing the predicted results with previously published experimental results from a 200 kW pilot furnace. A suction pyrometer has been used to measure the local temperature and concentrations of CO, CO2, and O2 at 24 different locations. A three-dimensional CFD model was developed and the validity of using different submodels describing turbulence and chemical reactions was evaluated. The standard model was compared with the realizable model for turbulence, while Probability Density Function (PDF) with either chemical equilibrium or the Steady Laminar Flamelet Model (SLFM) was evaluated for combustion. Radiation was described using a Discrete Ordinates Model (DOM) with weighted-sum-of-grey-gases model (WSGGM). The smallest deviation between predictions and experiments for temperature (1.2%) was found using the realizable model and the SLFM. This improvement affects the prediction of gaseous species as well since the deviation between predictions and experiments for CO2 volume percentages decreased from 6% to 1.5%. This provides a recommendation for model selections in further studies on flameless oxy-fuel combustion.

from #AlexandrosSfakianakis via Alexandros G.Sfakianakis on Inoreader http://ift.tt/2dVH1W1
via IFTTT