Hot pressing temperature is determined according to the performance of boards, type of glue, and production efficiency of hot press. During hot pressing, the thermal energy has enhanced the plasticity of the fiber and created conditions for the integration of different bonds. The thermal energy will cause the moisture in raw board to vaporize. Temporary heating will expedite the solidification of hot set resin for decreased friction and increased fluidity. The hot pressing temperature usually refers to the temperature of hot pressing plate, but what plays function in actual use is the temperature inside the raw board. This research investigates the performance of MDF with respect to hot pressing temperature. The strength and water resistance of the product are improved with the increase of hot pressing temperature from 140°C to 160°C, the Modulus of Rupture (MOR) is increased by 9.8%, the Internal Bonding (IB) is increased by 33.6%, the water absorption (Wt) is decreased by 38.2%, and the thickness expansion rate () is decreased by 15.2%.
from #AlexandrosSfakianakis via Alexandros G.Sfakianakis on Inoreader http://ift.tt/2iU5FbQ
via IFTTT
Εγγραφή σε:
Σχόλια ανάρτησης (Atom)
Δημοφιλείς αναρτήσεις
-
Publication date: Available online 4 January 2018 Source: European Journal of Radiology Author(s): Peiyao Zhang, Jing Wang, Qin Xu, Zhen...
-
Medicine by Alexandros G. Sfakianakis,Anapafseos 5 Agios Nikolaos 72100 Crete Greece,00302841026182, Butyric Acid from Probiotic Staphyloco...
-
Does CBD Oil Lower Blood Pressure? This article was originally published at SundayScaries." Madeline Taylor POSTED ON January 13, 20...
-
Medicine by Alexandros G. Sfakianakis,Αλέξανδρος Γ. Σφακιανάκης A Novel Technique for Endoscopic Repair of Large Anterior Skull Base Defect...
-
2016-11-22T07-55-59Z Source: International Journal of Medical Science and Public Health Banothu Srinivas, Madhu Mohan Reddy B. Backgrou...
-
2016-10-15T06-30-01Z Source: The Southeast Asian Journal of Case Report and Review Sangita Deepak Kamath, Neeraj Jain, Saurabh Pathak, Ba...
-
BACKGROUND AND PURPOSE: Lesion load is a common biomarker in multiple sclerosis, yet it has historically shown modest association with cl...
-
Abstract The development of focused ion beam-scanning electron microscopy (FIB-SEM) techniques has allowed high-resolution 3D imaging of n...
-
Vol.48 No.2 from #AlexandrosSfakianakis via Alexandros G.Sfakianakis on Inoreader http://ift.tt/1S2Z7n2 via IFTTT
Δεν υπάρχουν σχόλια:
Δημοσίευση σχολίου